LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Front Suspension System) >> Troubleshooting >> Ride Too Soft

Ride Too Soft

WARNING: This page is about a different car, the 2002 Pontiac Grand Am, 2002 Oldsmobile Alero, and 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Did you review General Description and perform necessary inspections? If yes, go to next step. If no, see VISUAL/PHYSICAL INSPECTION .
  2. Verify that ride is too soft. Does vehicle ride normally? If yes, system is okay. If no, go to next step.
  3. Inspect tires for proper inflation pressure. Is tire inflation pressure correct? If yes, go to step  5. If no, go to next step.
  4. Inflate tires to correct pressure. Did you complete repair? If yes, go to next step.
  5. Inspect vehicle trim height. See RIDE HEIGHT  under ADJUSTMENTS & INSPECTION. Repair as necessary. Did you complete inspection/repair? If yes, go to next step.
  6. Inspect springs and struts for wear or damage. Are components worn or damaged? If yes, go to step  7. If no, go to step  8.
  7. Replace all of worn or damaged components. Did you complete repair? If yes, go to next step.
  8. Drive vehicle in order to verify repair.
scientia non olet · About LEMON Manuals