LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1543 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Stabilizer Link & Strut Nut
    GM929862Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
    IMPORTANT: Do not allow the stabilizer link ball stud to rotate while installing the link nut.
  1. Connect the stabilizer link to the strut.

    Tighten:  Tighten the nut to 65 N.m (48 lb ft).

    2. Fig 2: View Of Stabilizer Shaft & Link
    GM927949Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not allow the stabilizer link ball stud to rotate while installing the link nut.
  2. Connect the stabilizer link to the stabilizer bar.

    Tighten:  Tighten the nut to 65 N.m (48 lb ft).

  3. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals