LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1543 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Stabilizer Bar Clamps, Bushings & Bolts
    GM929945Courtesy of GENERAL MOTORS CORP.
  1. Install the stabilizer bar clamps and bushings to the stabilizer bar.
    2. NOTE: Refer to Fastener Notice .
  2. Install the stabilizer bar clamp to cradle bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals