Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector to the lighted rearview mirror, if equipped.
- Slide the mirror onto the mirror support.NOTE: Refer to FASTENER NOTICE .
- Install the screw to the base.
Tighten
Tighten the mirror screws to 2 N.m (18 lb in).
- Install the wire harness cover from the lighted rearview mirror, if equipped.