LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1496 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a pry bar in order install the stabilizer shaft link insulators and the spacer.
  2. Install the stabilizer shaft link and insulators.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the stabilizer shaft link bolt and nut.

    Tighten 

    Tighten the stabilizer shaft link nut to 23 N.m (17 lb ft).

  4. Lower the vehicle.
    Fig 1: Installing Stabilizer Shaft Link Bolt & Nut
    G01746853Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals