LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1496 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a pry bar in order to install the stabilizer shaft insulator.

    Ensure that the stabilizer shaft insulator locating tabs (3) align with the indentations in the frame (2).

  2. Ensure that the stabilizer shaft insulator locating tabs (3) align with the indentations in the frame (2).
  3. Install the left and right side stabilizer shaft insulator brackets.
    NOTE: Refer to FASTENER NOTICE .
  4. Install the left and right side stabilizer shaft insulator bracket bolts.

    Tighten 

    Tighten the stabilizer shaft insulator bracket bolts to 48 N.m (35 lb in).

  5. Lower the vehicle.
    Fig 1: Installing Stabilizer Shaft Insulators
    G01746855Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals