LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1480 (Body Front End) >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hood Hold-Open Rod
    GM928830Courtesy of GENERAL MOTORS CORP.
  1. If removed, install bushing into upper tie bar.
  2. Install rod by using rod end into bushing and twisting.
  3. Remove the hood support.
  4. Close the hood.
scientia non olet · About LEMON Manuals