LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1405 (Tire Pressure Monitoring System) >> Repair Instructions >> Tire Pressure Monitor Reset Procedure >> Using the Scan Tool

Using the Scan Tool

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust all tire pressures to the recommended kPa/psi.
  2. Install the scan tool.
  3. Turn ON the ignition, with the engine OFF.
  4. With the scan tool select Special Functions.
  5. Select TIM Reset.
  6. Press the Reset soft key.
  7. The LOW TIRE indicator will flash 3 times, then turn OFF.
  8. Use the scan tool in order to clear the TPM DTC.
scientia non olet · About LEMON Manuals