LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1298 (Stationary Window System) >> Repair Instructions >> Side Window Filler Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Filler Panel To Windshield Pillar
    GM423947Courtesy of GENERAL MOTORS CORP.
  1. Remove the windshield weatherstrip, the side retainer, and the windshield side reveal molding. Refer to Side Reveal Molding Replacement (Coupe and Convertible)  or Side Reveal Molding Replacement (Hardtop) .
  2. Remove the side window filler panel.

    Remove the screws attaching the filler panel.

    Separate the filler panel from the sealant attaching the panel to the windshield pillar.

  3. Remove the old sealant from the windshield pillar.
scientia non olet · About LEMON Manuals