Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inside Rearview Mirror Electrical Connector & Bracket

Courtesy of GENERAL MOTORS CORP.

Slide the rearview mirror down onto the bracket.
Connect the electrical connector.
NOTE: Refer to Fastener Notice in Cautions and Notices.

Tighten the mirror tension screw.

Tighten: Tighten the rearview mirror mount tension screw to 1.5 N.m (13 lb in).