LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1260 (Body Front End) >> Repair Instructions >> Hood Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Insulator, Rear Hood, Front Holding Tabs & Retainers
    GM385753Courtesy of GENERAL MOTORS CORP.
  1. Position the insulator (1) to the rear hood (3) and fold at the center to position under the front holding tabs (4).
  2. Install the retainers (2).
  3. Install the underhood lamp assembly and press the assembly in order to attach.
    4. Fig 2: Installing Fasteners To Underhood Lamp Harness
    GM385754Courtesy of GENERAL MOTORS CORP.
  4. Install the fasteners to the underhood lamp harness.
  5. Connect the electrical connector to the underhood lamp assembly.
  6. Close the hood.
scientia non olet · About LEMON Manuals