LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1232 (Body Front End) >> Repair Instructions >> Hood Latch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the hood latch release cable to the hood latch.
    Fig 1: Connecting Hood Latch Release Cable To Hood Latch
    G01503966Courtesy of GENERAL MOTORS CORP.
  2. Position the hood latch to the marks on the hood latch support bracket.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the hood latch to center support bracket bolts.

    Tighten 

    Tighten the hood latch to center support bracket bolts to 25 N.m (18 lbft).

  4. Adjust the hood as required. Refer to HOOD ADJUSTMENT  .
  5. Close the hood.
    Fig 2: Installing Hood Latch To Center Support Bracket And Bolts
    G01503967Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals