Steering Wheel: Installation
WARNING: This page is about a different car, the 2000 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Route wiring through steering wheel. Align mark on steering wheel with mark on shaft, then install nut. Tighten steering wheel nut to 30 ft. lbs. (41 N.m).
- Install driver-side air bag module. See AIR BAG MODULES .
Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Check system for proper operation. See SYSTEM OPERATION CHECK .