LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1184 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Door Lock Switch Replacement (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door lock switch plate from the front door trim panel using a small flat-bladed tool at the front of the power window control switch.
  2. Disconnect the electrical connector from the front door lock control switch.
  3. Remove the front door lock control switch (1) from the front door trim panel.
  4. Remove the front door lock control switch from the front door lock switch plate using a small flat-bladed tool.
    Fig 1: Removing Front Door Lock Control Switch
    G01722202Courtesy of GENERAL MOTORS CORP.