LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1157 (Engine Cooling System) >> Repair Instructions >> Fan Shroud Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fan shroud.
  2. Raise the vehicle.
    Fig 1: Fan Shroud
    G01971802Courtesy of GENERAL MOTORS CORP.
  3. Install the radiator outlet hose to the radiator.
  4. Reposition the radiator outlet hose clamp to the radiator using J 38185  .
    Fig 2: Installing Radiator Outlet Hose To Radiator
    G01971803Courtesy of GENERAL MOTORS CORP.
  5. Install the forward lamp harness to the retaining clips on the fan shroud.
  6. Connect the cooling fan electrical connectors.
    Fig 3: Connecting Cooling Fan Electrical Connectors
    G01971804Courtesy of GENERAL MOTORS CORP.
  7. Lower the vehicle.
  8. Install the radiator inlet hose to the radiator.
  9. Reposition the radiator inlet hose clamp to the radiator using J 38185  .
  10. Install the radiator support. Refer to RADIATOR SUPPORT REPLACEMENT .
  11. Fill the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM .
    Fig 4: Installing Radiator Inlet Hose To Radiator
    G01971805Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals