LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1149 (Wheel Alignment Specifications & Adjustment Procedures) >> Repair Instructions >> Rear Toe Adjustment

Rear Toe Adjustment

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the rear suspension adjustment link lock nut (1).
    Fig 1: Adjusting Rear Toe
    G01419339Courtesy of GENERAL MOTORS CORP.
  2. Rotate the inner tie rod (2) to the required toe specification setting. Refer to WHEEL ALIGNMENT SPECIFICATIONS .
    NOTE: Refer to FASTENER NOTICE .
  3. Tighten the rear suspension adjustment link lock nut.

    Tighten 

    Tighten the rear suspension adjustment link lock nut to 60 N.m (44 lb ft).

  4. Check the toe setting after tightening.
  5. Adjust the toe setting if necessary.
scientia non olet · About LEMON Manuals