LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1093 (Engine Exhaust System) >> Repair Instructions >> Converter Hanger Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the catalytic converter hanger insulators from the catalytic converter.
    3. Fig 1: Identifying Catalytic Converter Hanger Bolts
    GM373015Courtesy of GENERAL MOTORS CORP.
  3. Remove the catalytic converter hanger bolts.
  4. Remove the catalytic converter hanger.
scientia non olet · About LEMON Manuals