LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1084 (Stationary Window System) >> Repair Instructions >> Rearview Mirror Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Rearview Mirror
    GM330783Courtesy of GENERAL MOTORS CORP.
  1. Position the center bottom of the mirror mount against the windshield at the top of the support button.
  2. Slide the base of the mirror onto the button.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Make sure the mirror is firmly seated on the windshield button by pushing down on the base of the mirror.

    Tighten:  Tighten the screw (3) to 1.8 N.m (16 lb in) in order to secure the mirror base to the button.

    4. Fig 2: Rearview Mirror Electrical Connector
    GM311618Courtesy of GENERAL MOTORS CORP.
  4. Install the base trim cover.
  5. Connect the electrical connector (3) to the back of the mirror.
  6. Install the wire harness cover.
  7. Reposition the mirror.
scientia non olet · About LEMON Manuals