LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1080 (Body Front End) >> Repair Instructions >> Fender Sound Insulator Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The front fender insulator must be kept near the flange of the front fender wheel opening to avoid interference with the front door edge.
  1. Install the front fender insulator to the stud in the inner fender, pressing into place until fully seated.
    Fig 1: Identifying Front Fender Insulator
    GM621361Courtesy of GENERAL MOTORS CORP.
  2. Install the front fender liner. Refer to Front Fender Liner Replacement .
scientia non olet · About LEMON Manuals