LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1073 (Seat System) >> Repair Instructions >> Lumbar Support Knob Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front Seat Lumbar Control Knob
    GM626943Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The splines on the lumbar support knob must be properly aligned to the lumbar control shaft for a proper fit.
  1. Install the knob to the lumbar control shaft.
  2. Install the lumbar support knob by pressing into place until fully seated
scientia non olet · About LEMON Manuals