Disabling Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
- Turn OFF the ignition.
- Remove the key from the ignition switch.
- Remove the console accessory wiring junction block access hole cover.IMPORTANT: With the SIR Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation, and does not indicate an SIR system malfunction.
- Remove the SIR Fuse.
- Remove the RH insulator panel.
- Remove the CPA (2) from the inflatable restraint IP module connector (1) located behind the RH insulator panel.
- Disconnect the I/P module connector (1).