LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel Systems (Gasoline) >> Intake Manifold Assembly >> Removal (2.2L)

Removal (2.2L)

  1. Disconnect negative battery cable. Remove upper fan shroud. Disconnect vacuum brake booster hose. Remove air cleaner outlet resonator. Disconnect necessary harness connectors. Disconnect vacuum hoses from throttle body. Remove right-side fender wheelwell extension.
  2. Remove necessary pipe bracket retainers from intake manifold. Disconnect fuel feed and return lines at fuel rail. Disconnect control cables from throttle body. Disconnect spark plug wires from spark plugs. Remove spark plug wiring harness retainer from heater hose pipe and position wiring harness aside.
  3. Working through wheelwell, remove generator rear brace from engine. Remove engine wiring harness bracket at back of engine. Remove intake manifold assembly retaining bolts. Remove intake manifold assembly and gasket.
scientia non olet · About LEMON Manuals