Test F: Lock System Does Not Lock
- After reviewing ignition lock system description perform PRELIMINARY INSPECTION under TROUBLE SHOOTING. After performing preliminary inspection, go to next step.
- If lock system does not operate normally, go to next step. If lock system operates normally, system is okay.
- Check for incorrect, worn or damaged keys. If all keys are okay, go to next step. If keys are not okay, go to step 9 .
- Check for faulty lock cylinders. If lock cylinders are not damaged, go to next step. If any lock cylinder is damaged, go to step 10 .
- Check shift linkage adjustment. See appropriate TRANSMISSION SERVICING - A/T article in AUTOMATIC TRANSAXLE. If shift linkage is adjusted properly, go to next step. If shift linkage is out of adjustment, go to step 11 .
- Check automatic transmission shift lock control adjustment. See appropriate TRANSMISSION SERVICING - A/T article in AUTOMATIC TRANSAXLE. If shift lock has proper adjustment, go to next step. If shift lock is not adjusted properly, go to step 12 .
- Check ignition switch assembly for damage. If ignition switch assembly is not damaged, go to next step. If ignition switch assembly is damaged, go to step 13 .
- Check park lock for damage and cycle manual override. If park lock is not damaged, go to step 3 . If park lock is damaged, go to step 14 .
- Replace ignition key. Ensure key is same mechanical cut as original key. After repairs are made, go to step 15 .
- Replace ignition lock cylinder. See IGNITION LOCK CYLINDER under REMOVAL & INSTALLATION. After repairs are made, go to step 15 .
- Adjust shift linkage. See appropriate TRANSMISSION SERVICING - A/T article in AUTOMATIC TRANSAXLE. After repairs are made, go to step 15 .
- Replace automatic transmission shift lock control. See appropriate TRANSMISSION SERVICING - A/T article in AUTOMATIC TRANSAXLE. After repairs are made, go to step 15 .
- Replace ignition switch. See IGNITION SWITCH under REMOVAL & INSTALLATION. After repairs are made, go to step 15 .
- Replace park pawl actuator. See PARK PAWL ACTUATOR under REMOVAL & INSTALLATION.
- Operate lock system to verify repairs. If lock system operates normally, testing is complete. If lock system does not operate normally, go to step 3 .