LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2000 >> Sunfire GT, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Body Control Modules) >> Removal & Installation >> Electronic Brake Control Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Pontiac Sunfire, 2002 Chevrolet Cavalier, 2001 Pontiac Sunfire, and 2001 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect Electronic Brake Control Module (EBCM) harness connector. Disconnect EBCM harness from bracket. Remove EBCM mounting screws. Remove EBCM.
  2. Clean mounting surfaces. To install, reverse removal procedure. Tighten EBCM mounting bolts to 44 INCH lbs. (5 N.m). Perform ABS diagnostic system check. See ELECTRONIC BRAKE CONTROL MODULE DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
scientia non olet · About LEMON Manuals