Front Console: Removal
- Suitably block the drive wheels. Turn the ignition key to the RUN position. Place the shift lever in the Neutral position. Remove the console trim plate. See TRIM PLATE
.
- Raise the park brake handle as far as possible. If you cannot pull the park brake handle up far enough to remove the console, perform the following steps:
- Release the park brake handle.
- Hold the adjuster pawl disengaged. See Fig 1
.
The park brake handle can be pulled up further.
- Remove the floor console bolts (1). See Fig 2
. Disconnect the power outlet electrical connector. Remove the floor console (2) from the vehicle.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.