LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2000 >> Firebird Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Removal & Installation, Overhaul >> Emission Systems & Sub-Systems >> Secondary Air Injection Pump >> Installation

Secondary Air Injection Pump: Installation

  1. Install the lower AIR pump bolts/nuts into the cradle bracket and push down. Install the upper AIR pump to cradle bolt. Tighten Tighten the upper AIR pump to cradle bolt to 90 N.m (80 lb in).
  2. Ensure that the rubber o-ring is on the bottom of the AIR pump.
    IMPORTANT: Listen for a CLICK to ensure proper connection of the AIR inlet hose/filter to the AIR pump.
  3. Install the AIR inlet hose/filter assembly to the AIR pump. Install the AIR pump exhaust hose to the AIR pump, and secure with hose clamp.
  4. Reconnect the AIR pump electrical connector. Raise the wheel well/splash shield into position. Re-install the wheel well/splash shield retaining screws. Lower the vehicle.
scientia non olet · About LEMON Manuals