Remote Unlock Control Customization
NOTE:
If ignition is turned to OFF position during RAV procedure, customization will be terminated and system will remain in most recent mode.
- Remove MALL PGM fuse from fuse panel.
- Turn ignition to ACC position. The seat belt telltale flashes and the chime will sound 1-2 times, equal to the current customization mode. This indicates which mode the vehicle is in. Each time you press the transmitter UNLOCK button, the mode number advances. A transition past mode 2 will repeat, starting again at mode 1.
- If you want to customize other features, customize the features before reinstalling the MALL PGM fuse into the fuse panel. Turn the ignition OFF in order to perform the following functions:
- Exit.
- Save the current customization.
- Replace the MALL PGM fuse back into the fuse panel.
REMOTE UNLOCK CONTROL CUSTOMIZATION
| Mode | Remote Driver's Door Unlock |
|---|---|
| 1 | Disabled |
| 2 | Enabled |