Remote Activation Verification (RAV) Customization
NOTE:
If the ignition switch is moved to the OFF position during this procedure, the remote activation verification (RAV) customization will terminate.The system will remain in the most recent mode.
- Remove the MALL PGM fuse from the fuse panel.
- Turn the ignition to the ACC position. The seat belt telltale flashes and the chime sounds 1-4 times, equal to the current customization mode. This indicates which mode the vehicle is in. Each time the transmitter LOCK is pressed, the mode number advances. A transition past 4 will repeat, starting again at mode 1.
- If you want to customize other features, customize the features before reinstalling the MALL PGM fuse into the fuse panel. Turn the ignition OFF in order to perform the following functions:
- Exit.
- Save the current customization.
- Replace the MALL PGM fuse back into the fuse panel.
RAV MODE CUSTOMIZATION
| Mode |
Unlock Verification |
Lock Verification |
| 1 |
Disabled |
Disabled |
| 2 |
Headlights Only |
Headlight Only |
| 3 |
Headlights Only |
Horn And Headlights |
| 4 |
Headlights Only |
Headlights Only;
Horn And Headlights |