LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1996 >> Trans Sport >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System/Component Tests >> Miscellaneous Pcm/VCM Controls >> A/C Clutch (C-10) >> A/C Clutch Relay

A/C Clutch Relay

  1. Disconnect A/C clutch relay harness connector. Using proper mini-schematic and an ohmmeter, check continuity between A/C clutch relay winding terminals. See WIRING DIAGRAMS article. Continuity should exist. Check continuity between clutch drive circuit terminals of relay. Continuity should not exist.
  2. Using jumper wires, apply ground and battery voltage to relay winding. Continuity should now exist between clutch drive circuit terminals of relay. Replace A/C clutch relay if continuity does not exist.
A/C COMPRESSOR CLUTCH RELAY LOCATION

Application Location
"U" Series On Bracket, Behind Right Headlight
scientia non olet · About LEMON Manuals