LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1996 >> Grand Prix Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Wheel Alignment Procedures >> Camber Adjustment (Front)

Camber Adjustment (Front)

  1. Loosen 3 strut cover attaching nuts. Remove strut cover. Lift front of vehicle enough to allow strut attaching studs to clear mounting holes. Cover top of strut to keep metal shavings from damaging strut. Using Template (J-36892) as a guide, file the 3 holes as necessary to allow for camber adjustment. See Fig 1 .
    CAUTION: DO NOT lift vehicle by suspension parts. DO NOT overextend drive axles.
  2. Paint exposed surfaces with rust-preventive paint or primer. Lower front of vehicle while aligning studs into holes. Install, but DO NOT tighten, 3 strut cover attaching nuts. Set camber to specification. Tighten strut cover attaching nuts to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Adjusting Front Camber
G95H14636Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals