LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1995 >> Firebird Formula, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 3.4L/5.7L >> Ignition System >> Ignition Control Module (Dis) >> Removal & Installation (3.4L)

Removal & Installation (3.4L)

  1. Disconnect negative battery cable. Disconnect connectors at ignition control module. See Fig 1. Disconnect spark plug wires from coil pack. Remove coil pack/ignition control module assembly. For ignition control module location, see COMPONENT LOCATIONS in SYSTEM/COMPONENT TESTS - 3.4L article in this section below. Separate ignition coil(s) from ignition control module (if possible).
  2. To install, reverse removal procedure. Tighten ignition control module mounting bolts/nuts. Tighten mounting bolts/nuts to specification. See TORQUE SPECIFICATIONS .
Fig 1: Distributorless Ignition Control Module Components (3.4L)
G95C13443Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals