Repair and Diagnosis: Electrical: Starter: Overhaul: Starter

CAUTION: DO NOT clean starter in degreasing tank or with grease dissolving solvents. This will remove lubricant from clutch mechanism.

Starter motors do not require lubrication, except during overhaul. Roll-type overrunning clutch requires no lubrication. Drive assembly, however, should be wiped clean and lubricated with silicon grease on shaft, underneath overrunning clutch assembly. See Fig 1 , Fig 2 andFig 3 .

Fig 1: Exploded View Of Delco-Remy Starter Motor (SD200 & SD250)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Exploded View Of Delco-Remy Starter Motor (SD210 & SD260)

Courtesy of GENERAL MOTORS CORP.

Fig 3: Exploded View Of Delco-Remy Starter Motor (PG250)

Courtesy of GENERAL MOTORS CORP.