DTC 95 Brake Switch Circuit Open: Notes
This test Identifies open brake switch circuit that prevents brake switch input to EBCM from changing status when brakes are applied. DTC 95 is used in conjunction with DTCs 91 and 92 to determine cause of an open brake switch malfunction.
DTC 95 can set after initialization is complete if brake switch input voltage is out of specification for one second. DTC will be stored, ABS will be disabled and ABS or ABS INOP warning light will turn on.
NOTE:
Test numbers refer to numbers on diagnostic chart.
- Confirms open circuit currently exists.
- Determines if brake switch signal is being received by EBCM.
- Isolates open circuit to either brake switch or brakelight circuit.
- Isolates open circuit to either brake switch input circuit or EBCM.