Unlock Function Operates From Transmitter Only. Lock Function

& Both Power Door Lock Switches Totally Inoperative

1) Disconnect left power door lock switch. Disconnect keyless entry receiver connector C2, located behind right kick panel. Check connector terminal "D" (Orange/Black wire) for an open circuit or poor connection and repair as necessary.

2) If circuit is okay, connect a test light between voltage and switch terminal "D" (Orange/Black wire) or "B" (Dark Blue wire). Connect other terminal to ground. Test light should light with switch in rest position.

3) Move switch from LOCK to UNLOCK position several times. If test light is on when switch is left in rest position, check for poor connection to keyless entry receiver connector C2, terminal "A" (Orange/Black wire). If connection is okay, replace keyless entry receiver. If test light is not on when switch is left in rest position, replace left power door lock switch.