Trouble Shooting
- Check ignition key assembly for a cracked, dirty, or coated resistor pellet. Ensure ignition key is free from excess plastic around resistor pellet contacts.
- Using PASS-Key II(R) Interrogator (J 35628-A) check ignition key. If key code window shows an "E", replace key.
- Look into key opening and check key pellet sensing contacts in ignition lock cylinder. If contacts are damaged or not Silver, replace lock cylinder.
- Check for an open ECM IGN fuse No. 5 or ECM BATT fuse No. 4. In addition, check instrument panel fuse block contacts for each fuse.