LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1993 >> LeMans VL >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> On-Vehicle Testing >> Solenoid Tests >> Hold-In Winding

Hold-In Winding

  1. Connect ammeter in series with a 12-volt battery and "S" terminal on solenoid. See Fig 1. Connect a voltmeter between solenoid "S" terminal and ground. Connect a carbon pile across battery.
  2. Adjust voltage to 10 volts. Ammeter should indicate 13-19 amps.
Fig 1: Testing Solenoid Windings
G102066Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals