Code 15: Coolant Temp Sensor Signal Volt High: Notes
Coolant temperature is one of the inputs used to control fuel delivery, spark timing, idle speed, converter clutch, canister purge, air management (manual transmission), EGR and cooling fan.
NOTE:
Test numbers refer to test numbers on diagnostic chart.
- Code 15 will set if signal voltage indicates coolant temperature is low for 3 seconds.
- This test simulates a Code 14. If the ECM recognizes the low signal voltage and the "Scan" tester reads 130°C or more, ECM and wiring are okay.
- This test will determine if circuit No. 410 is open. There should be 5 volts present at sensor connector if measured with a DVOM.