LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1988 >> LeMans SE, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - TBI >> Overhaul >> Reassembly >> Fuel Meter Assembly

Fuel Meter Assembly

  1. Install new fuel meter-to-throttle body assembly gasket. Match cut out portions of gasket with openings in throttle body assembly.
  2. Place fuel meter assembly on throttle body. Install fuel meter-to -throttle body retaining screws and washers (screws should be coated with locking compound). Tighten screws to 53 INCH lbs. (6.0 N.m).
  3. Install new "O" rings on fuel lines. Using a back-up wrench, tighten fuel lines to 20 ft. lbs. (27 N.m). To complete assembly, reverse disassembly procedure.
scientia non olet · About LEMON Manuals