LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1988 >> Fiero Formula, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - TBI >> Overhaul >> Throttle Body Cover >> Disassembly

Throttle Body Cover: Disassembly

  1. Remove air cleaner. Disconnect injector electrical lead by squeezing tabs together and pulling lead straight up. Remove 5 screws holding cover to throttle body, noting location of 2 short screws.
  2. Remove throttle body cover. Throttle body cover and pressure regulator are serviced as assembly. DO NOT immerse cover in any type of cleaning solvent.
Fig 1: Model 700 Throttle Body Injection Assembly
G7758Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals