LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1985 >> Fiero GT, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Single Unit TBI >> Overhaul >> Disassembly >> Throttle Body

Throttle Body

  1. Disassembly of throttle body unit for immersion in cleaning solvent requires removal of TPS and IAC assembly. Throttle valve screws are staked in position and should not be removed. If necessary to remove TPS, continue as follows:
  2. Invert throttle body assembly and place on clean, flat surface. Remove and discard 2 TPS attaching screws, lock washers and retainers. Remove TPS from throttle body. See Fig 1 .
  3. If necessary, remove TPS actuator lever-to-throttle shaft screw. Remove IAC assembly from throttle body. Remove and discard IAC gasket.
Fig 1: Removing TPS Assembly Invert throttle body unit to remove TPS.
G606
scientia non olet · About LEMON Manuals