LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1984 >> 6000 STE >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Wheel Alignment Specifications & Procedures) >> Adjustments >> Toe-In Adjustment >> Rear Wheels

Rear Wheels

WARNING: This page is about a different car, the 1984 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Adjust rear wheel toe after rear camber has been set. To adjust, loosen boot and lock nut near outer end of tie rod. Rotate tie rod with tool clamped to serrated area to obtain specified toe. Tighten lock nut. Adjust boot to cover lock nut and serrations.

Fig 1: Toe-In Adjuster Tube Clamp & Bolt Positions
G26714
Fig 2: Typical Alignment Machine Set Up For Rear Wheel Alignment
G26715
scientia non olet · About LEMON Manuals