Ignition Timing
NOTE:
Engines are equipped with a receptacle for a magnetic probe timing light, located 9.5° ATDC. Do not use this receptacle with a normal timing light.
Check or adjust engine timing with engine idling at specified RPM and at operating temperature. Disconnect 4-wire connector from base of distributor. After adjusting timing, reconnect connector.
Ignition Timing Specifications (Degrees BTDC@RPM)
| Application | Man. Trans. | Auto. Trans. |
|---|---|---|
| 1.6L | 18@800 | 18@700 |
| 2.5L | 4@1000 | 4@675 |