Removal & Installation
- Lower window to full down position. If equipped with manual windows, remove window crank. Remove speaker grille from door panel. Remove screws attaching door panel-to-door from around speaker. Remove screw cap and screw attaching arm rest pull cup-to-support bracket. Remove screw cap and screw attaching door latch handle-to-door panel. Disengage clips attaching door panel-to-outer edges of door.
- Lift door panel upward to disengage upper retainer channel. Pull top of door panel away from door. Remove clip attaching latch linkage-to-door handle. Disconnect power mirror switch connector. Remove screws attaching mirror bezel-to-door. Disconnect mirror wiring connector. Disengage mirror wiring harness connector from door. Remove mirror mounting nuts. Remove mirror. To install, reverse removal procedure.