LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 2001 >> Neon High Line, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Instrument Cluster >> SBEC Messages Not Received By EMIC

SBEC Messages Not Received By EMIC

NOTE: After making any repairs, perform BODY VERIFICATION TEST  under VERIFICATION TESTS.

Turn ignition off. Connect scan tool to Data Link Connector (DLC). DLC is located on bottom of instrument panel, to left of brake pedal. See Figure . Turn ignition on. Using scan tool, clear Diagnostic Trouble Codes (DTC). Turn ignition off, then on. After 30 seconds, recheck DTCs. If SBEC MESSAGE NOT RECEIVED is displayed, go to NO RESPONSE FROM PCM (PCI BUS)  under COMMUNICATIONS. If SBEC MESSAGE NOT RECEIVED is not displayed, test is complete.

scientia non olet · About LEMON Manuals