Fluid Capacities (Ram Pickup)

FLUID CAPACITIES (RAM PICKUP)

Application

⁽¹⁾ Quantity

Crankcase (Includes Filter) ⁽²⁾

3.9L

4.0 Qts. (3.8L)

5.2L & 5.9L (Gasoline)

5.0 Qts. (4.7L)

5.9L (Diesel)

11.0 Qts. (10.4L)

8.0L

7.0 Qts. (6.6L)

Cooling System (Includes Heater)

3.9L, 5.2L & 5.9L (Gasoline)

20.0 Qts. (18.9L)

5.9L (Diesel)

24.0 Qts. (22.7L)

8.0L

26.0 Qts. (24.6L)

Automatic Transmission (Mopar ATF Plus Type 7176)

42RE (3.9L)

Drain & Refill

⁽³⁾ 1.5 Qts. (1.4L)

Dry Refill

⁽⁴⁾ 8.5-11.0 Qts. (8.0-10.4L)

46RE (3.9L, 5.2L & 5.9L Gasoline)

Drain & Refill

⁽³⁾ 1.5 Qts. (1.4L)

Dry Refill

⁽⁴⁾ 9.5-11.5 Qts. (8.9-10.8L)

47RE (5.9L Diesel & 8.0L)

Drain & Refill

⁽³⁾ 1.5 Qts. (1.4L)

Dry Refill

⁽⁴⁾ 14.5-16.5 Qts. (13.7-15.6L)

Manual Transmission ⁽⁵⁾

NV 3500 (Mopar M/T Lube P/N 4761526)

3.9L & 5.2L

2.1 Qts. (2.0L)

NV 4500 (Mopar M/T Lube P/N 4637579) ⁽⁶⁾

5.9L (Gas & Diesel) & 8.0

4.0 Qts. (3.8L)

NV5600 (Mopar M/T Lube P/N 4761526) ⁽⁶⁾

4.75 Qts. (4.5L)

Front Differential (SAE 80W-90/API GL-5)

Dana 44 (Model 216)

1500 & 2500

4.8 Pts. (2.3L)

Dana 60 (Model 248)

2500 & 3500

7.6 Pts. (3.6L)

Rear Differential

9 1/4" Ring Gear (SAE 75W-90/API GL-5) ⁽⁷⁾

1500 & 2500

4.8 Pts. (2.3L)

Dana 60 (Model 248) (SAE 90W/API GL-5) ⁽⁸⁾

2500

6.3 Pts. (3.0L)

Dana 70 (Model 267) (SAE 90W/API GL-5) ⁽⁹⁾

2500

7.0 Pts. (3.3L)

Dana 80 (Model 286) (SAE 85W-90/API GL-5) ⁽¹⁰⁾

2WD 3500

6.8 Pts. (3.2L)

4WD 3500

10.1 Pts. (4.8L)

Power Steering Fluid ⁽¹¹⁾

2.7 Pts. (1.3L)

Power Take-Off (PTO) Adapter (Mopar ATF Plus Type 7176)

2500 & 3500 Models 2WD With A/T

4.6 Pts. (2.2L)

Transfer Case (Mopar ATF Plus Type 7176) ⁽¹²⁾

NV 231HD

2.5 Pts. (1.2L)

NV 241

5.0 Pts. (2.4L)

NV 241HD

6.5 Pts. (3.1L)

NV 241HD With Power Take-Off (PTO)

9.0 Pts. (4.3L)

⁽¹⁾	Approximate quantity listed.

⁽²⁾	On gasoline engines, use an API energy conserving engine oil that is certified for gasoline engines. On diesel engines, use engine oil with API CF-4/SH or CG-4/SH rating for diesel engines.

⁽³⁾

Add this amount of fluid. Start engine and shift transmission through all gears and back to Neutral. Add additional fluid to bring fluid level to the MIN mark on dipstick. Recheck fluid level with transmission at normal operating temperature. Adjust fluid level to MAX mark on dipstick. Approximate drain and refill capacity is 4.0 qts. (3.8L).

⁽⁴⁾	Quantity may vary by type of oil cooler and oil cooler lines.

⁽⁵⁾

Verify type of transmission used before servicing. The NV 3500 uses a flywheel housing which is an integral part of the transmission housing. The NV 4500 uses a flywheel housing which is bolted to the front of the transmission and transmission contains a Power Take-Off (PTO) cover on passenger's side of transmission.

⁽⁶⁾	Heavy-duty transmission is used with 5.9L diesel and 8.0L.

⁽⁷⁾	Models with Trac-Lok limited slip differential must have 5 ozs. (.15L) of Mopar Trac-Lok Friction Modifier added if lubricant is changed.

⁽⁸⁾	Models with Trac-Lok limited slip differential must have 6 ozs. (.18L) of Mopar Trac-Lok Friction Modifier added if lubricant is changed.

⁽⁹⁾	Models with Power-Lok limited slip differential must have 8 ozs. (.24L) of Mopar Trac-Lok Friction Modifier added if lubricant is changed.

⁽¹⁰⁾	Models with Trac-Lok limited slip differential must have Mopar Trac-Lok Friction Modifier added if lubricant is changed. Add 7 ozs. (.24L) of modifier on 2WD models or 10 ozs. (.30L) on 4WD models.

⁽¹¹⁾	Use only Mopar power steering fluid. DO NOT use automatic transmission fluid.

⁽¹²⁾	Transfer case may be identified by model number stamped on identification tag on rear of transfer case, just above filler plug.