Power Mirror Switch Test
Remove switch and disconnect wiring connector. See POWER MIRROR SWITCH R & I . Using an ohmmeter, check continuity between power mirror switch terminals with switch in appropriate position. See POWER MIRROR SWITCH CONTINUITY TEST table. See Figure . If results differ from table, replace switch.
POWER MIRROR SWITCH CONTINUITY TEST
| Mirror Selector Position | Mirror Angle | Continuity Between Pins No. |
|---|---|---|
| "L" (Left) | Up | 9 & 12; 6 & 11; 9 & 13 |
| "L" (Left) | Down | 9 & 6; 12 & 11; 13 & 11 |
| "L" (Left) | Left | 9 & 7; 6 & 11; 9 & 8 |
| "L" (Left) | Right | 9 & 6; 7 & 11; 8 & 11 |
| "R" (Right) | Up | 9 & 13; 1 & 11; 9 & 12 |
| "R" (Right) | Down | 9 & 1; 13 & 11; 12 & 11 |
| "R" (Right) | Left | 9 & 8; 1 & 11; 9 & 7 |
| "R" (Right) | Right | 9 & 1; 8 & 11; 7 & 11 |
| Illumination | Right | 5 & 11 |