Brake Switch
Disconnect brake switch connector. The brake switch is located on the brake pedal support frame near the steering column. Using an ohmmeter, check for continuity at appropriate brake switch terminals with switch in indicated position. See Fig 1. If continuity is not as specified in BRAKE SWITCH CONTINUITY table, check brake switch adjustment. If switch adjustment is okay, replace defective brake switch.
BRAKE SWITCH CONTINUITY
| Switch Plunger Position | Check Continuity Between Terminals No. | |
|---|---|---|
| Released | 5 & 6 | |
| Depressed | ||
| 1 & 2 |
||
| 3 & 4 |
||