LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1998 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.4L >> DTC Test >> Test TC-15B - Speed Control Solenoid Circuits

Test TC-15B - Speed Control Solenoid Circuits

NOTE: Perform TEST TC-15A - SPEED CONTROL SOLENOID CIRCUITS  before proceeding. For connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagram, see WIRING DIAGRAMS article.
  1. Using ohmmeter, check resistance between terminal No. 4 (Dark Blue/Red wire) on connector for brake switch and terminal No. 3 (Dark Blue/Red wire) on connector for speed control servo.
  2. If resistance is less than 5 ohms, replace brake switch. Perform TEST VER-4A - SPEED CONTROL VERIFICATION . If resistance is 5 ohms or more, repair open circuit in the Dark Blue/Red wire between brake switch and speed control servo. Perform TEST VER-4A - SPEED CONTROL VERIFICATION .
scientia non olet · About LEMON Manuals