LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1998 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> Specifications >> Engine Controls - Service & Adjustment Specifications - 2.4L >> Capacities

Engine Controls - Service & Adjustment Specifications - 2.4L: Capacities

BATTERY SPECIFICATIONS

Application & Group Cold Cranking Amps Amp Hr. Rating
Dakota & Durango
Std. Battery (Group 27) 600 (1)
Opt. Battery (Group 27) 750 (1)
FWD Van
Caravan 2.4L (Group 34) 600 66
Voyager 2.4L (Group 34) 600 66
(1) Information is not available from manufacturer.
FLUID CAPACITIES

Application (1) Quantity
Crankcase (Includes Filter) (2) 4.5 Qts. (4.3L)
Cooling System (3) 11.2 Qts. (10.6L)
Automatic Transaxle (Mopar ATF Plus Type 7176)
3-Speed
Drain & Refill (4) 4.0 Qts. (3.8L)
Dry Refill 8.5 Qts. (8.0L)
4-Speed
Drain & Refill (4) 4.0 Qts. (3.8L)
Dry Refill 9.1 Qts. (8.6L)
Power Steering Fluid (5) 1.7 Pts. (.8L)
(1) Approximate quantity listed.
(2) Use an API energy conserving engine oil that is certified for gasoline engines.
(3) Quantity includes heater and coolant recovery tank. Add 2 qts. (1.9L) if equipped with rear heater.
(4) Add this amount of fluid. Start engine and shift transaxle through all gears and back to Park. Add additional fluid to bring fluid level to 1/8" below the ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level so fluid level is within the HOT range dipstick.
(5) Use only Mopar power steering fluid. DO NOT use automatic transmission fluid.