LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1997 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 2.4L >> Fuel System >> Fuel Pump Module >> Installation

Fuel Pump Module: Installation

  1. To install, reverse removal procedure using NEW "O" ring. Use proper procedure when installing fuel lines. See FUEL LINE DISCONNECT FITTINGS  under FUEL SYSTEM.
  2. Tighten fuel pump module lock nut and fuel tank strap bolts to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Disconnecting Electrical Connector At Fuel Pump Module & Locating Fuel Pump Module Lock Nut
G96G01700Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals